- Research article
- Open Access
Structural comparison of tRNA m1A58 methyltransferases revealed different molecular strategies to maintain their oligomeric architecture under extreme conditions
BMC Structural Biology volume 11, Article number: 48 (2011)
tRNA m1A58 methyltransferases (TrmI) catalyze the transfer of a methyl group from S-adenosyl-L-methionine to nitrogen 1 of adenine 58 in the T-loop of tRNAs from all three domains of life. The m1A58 modification has been shown to be essential for cell growth in yeast and for adaptation to high temperatures in thermophilic organisms. These enzymes were shown to be active as tetramers. The crystal structures of five TrmIs from hyperthermophilic archaea and thermophilic or mesophilic bacteria have previously been determined, the optimal growth temperature of these organisms ranging from 37°C to 100°C. All TrmIs are assembled as tetramers formed by dimers of tightly assembled dimers.
In this study, we present a comparative structural analysis of these TrmIs, which highlights factors that allow them to function over a large range of temperature. The monomers of the five enzymes are structurally highly similar, but the inter-monomer contacts differ strongly. Our analysis shows that bacterial enzymes from thermophilic organisms display additional intermolecular ionic interactions across the dimer interfaces, whereas hyperthermophilic enzymes present additional hydrophobic contacts. Moreover, as an alternative to two bidentate ionic interactions that stabilize the tetrameric interface in all other TrmI proteins, the tetramer of the archaeal P. abyssi enzyme is strengthened by four intersubunit disulfide bridges.
The availability of crystal structures of TrmIs from mesophilic, thermophilic or hyperthermophilic organisms allows a detailed analysis of the architecture of this protein family. Our structural comparisons provide insight into the different molecular strategies used to achieve the tetrameric organization in order to maintain the enzyme activity under extreme conditions.
Extremophiles are microorganisms that are found in environments of extreme temperature (-2°C to 15°C, 60-110°C), ionic strength (2-5 M NaCl) or pH (< 4, > 9). They are source of enzymes with extreme stability (extremozymes). Understanding the origin of this stability at a molecular level is very attractive as extremozymes are stable and active under conditions previously thought to be incompatible with biological materials. Only represented by bacterial and archaeal species, hyperthermophiles grow optimally at temperatures above 80°C . Some enzymes from hyperthermophiles are active at temperatures as high as 110°C and even above . To clarify, the term thermostability refers to the preservation of the unique chemical and three-dimensional structure of a polypeptide chain under extreme temperature conditions.
The comparison of mesophilic and thermostable homologous proteins has revealed some important factors that contribute to the remarkable stability of thermoenzymes. Previously reported studies aiming at establishing the origin of thermostability have compared the sequence and/or the structure of homologous proteins from thermophiles and mesophiles. Concerning the primary sequence, different characteristics have been identified as contributors to stability. First, significant changes in the amino-acid composition between mesophilic and thermophilic proteins have been described. Charged and hydrophobic residues are often over-represented in thermophilic proteins [3–5]. A higher Proline content, related with higher rigidity of the backbone has also been reported [6, 7]. Long and flexible loops tend to be absent in thermostable proteins and are often replaced by short and rigid ones [8–10]. Different structural features have also been shown to contribute to protein thermostability, such as an increased number of hydrogen bonds, more ionic interactions, greater hydrophobic interactions, a more compact and rigid packing, and the presence of disulfide bridges [11–14]. Importantly, these studies revealed that there is no single universal mechanism that promotes stability, and the molecular mechanisms behind thermostability can vary from one protein to the other [1, 11, 12].
Numerous chemical modifications occur after transcription during the tRNA maturation process . tRNA modification enzymes from extremophiles have not been so far the subjects of detailed structural analysis aiming at understanding the molecular basis of their stability. Actually, only thirteen post-transcriptional tRNA base modifications are conserved among the three domains of life, and twenty of them are common to bacteria and archaea . Here, we compare the available crystal structures of TrmI methyltransferases (MTases) that methylate the N1 atom of adenine at position 58 in the T-loop of tRNA. m1A58 is one of the modifications present in the three domains of life although it is not frequently found in bacteria. It has been proposed that the presence of this positively charged modified nucleotide, which is located on the outer edge of the molecular tRNA structure, is important for the tRNA tertiary structure and/or for recognition by its partner proteins. In the yeast Saccharomyces cerevisiae, m1A58 is essential for cell growth under normal conditions, as shown by the non-viability of mutants defective in N1-methylation of A58 in initiator tRNA [17, 18], whereas in the bacterium Thermus thermophilus, the TrmI enzyme is required for cell growth at high temperatures .
Although S-Adenosyl-L-Methionine (SAM) MTases displaying a Rossmann-like fold are mostly monomeric , the TrmI proteins share a conserved tetrameric quaternary structure both in solution [19, 21–24] and in the crystals [25–27]. This architecture is unique among the tRNA modification enzymes characterized up to now. In bacteria and archaea, the enzyme consists of a tetramer formed by identical subunits of about 30 kDa. In contrast, the yeast  and human tRNA m1A58 MTases  are hetero-tetrameric enzymes composed of two different subunits encoded by the TRM6 and TRM61 genes. It has been proposed that both subunits of eukaryotic tRNA m1A58 MTases evolved from a common ancestor through gene duplication and divergent evolution . Amino acid substitutions in either subunit prevent the yeast enzyme from binding to tRNAMeti, indicating that each subunit contributes to tRNA recognition . In the case of the homo-tetrameric T. thermophilus TrmI, noncovalent mass spectrometry analysis showed that the enzyme binds to its tRNA substrate as a tetramer and is able to bind up to two tRNAs per tetramer . This suggests that the structurally identical subunits have non-equivalent roles within the tetrameric structure, which is reminiscent of the case of homo-tetrameric archaeal tRNA splicing enzymes  and O-phosphoseryl-tRNA:selenocysteinyl-tRNA synthase . This would provide an explanation for the existence of both homo- and heterotetramers of TrmI proteins depending on the organism.
In the present report, we have performed comparative studies of the available crystal structures of TrmI proteins to highlight their common properties and shed light on the different structural factors that might explain the stability of TrmI enzymes from extremophiles. We have first compared the TrmI monomers and examined the different mechanisms that can contribute to the thermal stability of the subunit structure. Secondly, since the subunits of thermostable oligomeric enzymes are generally more tightly assembled than in less stable homologous species [31, 32], we have analyzed and compared the inter-subunit contacts in the various crystal structures. Interestingly, our study revealed that different strategies at the level of the inter-subunit contacts have been developed to stabilize the TrmI proteins from thermophilic and hyperthermophilic organisms. The key to achieve TrmI activity under extreme conditions of life appears to lie in the preservation of the tetrameric organization.
Results and discussion
Structural comparison of TrmI proteins
The archaeal and bacterial m1A58 MTases have similar size and architecture
The crystal structures of three bacterial and one archaeal TrmIs have previously been reported (Table 1): from Mycobacterium tuberculosis, a mesophilic bacterium (MtTrmI, initially called Rv2118c) [22, 25], Thermus thermophilus, a thermophilic bacterium (TtTrmI), Aquifex aeolicus (PDB code 2YVL, AaTrmI), a hyperthermophilic bacterium and Pyroccocus abyssi, a hyperthermophilic archaeon (PaTrmI) that lives in an environment of extreme pressure . Moreover, a search in the Dali database reveals that the PDB code 1O54, a putative SAM-dependent O-MTase from the thermophilic bacterium Thermotoga maritima, is inaccurately annotated and corresponds to the m1A58 MTase (TmTrmI). Finally, the PDB code 2B25, annotated as a human putative 1-methyladenosine MTase, corresponds to the product of the TRM61 gene (HsTrmI-61), the SAM-binding subunit that composes the hetero-tetramer of m1A58 MTase in eukaryotes and shows extensive sequence similarity to the bacterial and archaeal enzymes . These organisms, with structurally characterized TrmI proteins, display very different optimal growth temperatures (Table 1). These TrmI proteins show sequence identity ranging from 24.8% to 40.8%, the bacterial proteins from M. tuberculosis and T. thermophilus being the most similar and the two hyperthermophilic proteins (P. abyssi and A. aeolicus) the most dissimilar (Additional File 1, Table S1). Except otherwise stated, the residue numbering for T. maritima is used throughout the text.
The TrmI proteins show a tetrameric organization in the crystals as it was shown in solution [19, 21–24]. The crystallographic asymmetric unit consists of one, two or four subunits of the protein (Figure 1, Table 1) and the tetramer is assembled from the monomers using either the crystallographic or non-crystallographic symmetry. The four subunits of the homo-tetrameric TrmI proteins are related by a four-fold symmetry. Two opposite sides of the tetramer show positively charged grooves, wide enough to accommodate an A-form RNA helix , that likely bind the tRNA substrate (Figure 1A). Interestingly, the electrostatic surfaces are not similar in all TrmI proteins, TmTrmI showing a less positive surface than the four other proteins and MtTrmI and PaTrmI having the most positive surface (Figure 1A). Based on the characteristics of the different monomer-monomer interfaces, the tetramer can be described as a dimer of two tightly assembled dimers (A/B and C/D), which interact back to back as shown in Figure 1B. The two protruding antiparallel β-strands at the C-terminus of each monomer contribute significantly to the tetrameric assembly (Figure 1C).
MtTrmI, TmTrmI and PaTrmI (space group I222) contain one TrmI monomer in the asymmetric unit and the tetramer is generated using the crystallographic symmetry. In AaTrmI and in the two crystal forms of PaTrmI in complex with SAH, the crystallographic asymmetric unit contains a full tetramer and there are similar relationships between the monomers except that all axes are non-crystallographic. The four monomers display an rmsd between equivalent Cα atoms of less than 0.27 Å, 0.66 Å and 0.05 Å for AaTrmI, PaTrmI (space group P212121) and PaTrmI (space group P31), respectively. In TtTrmI and HsTrmI, the asymmetric unit contains the tight A/B dimer and the A/D dimer, respectively, in which the two monomers are related by the non-crystallographic 2-fold axis. The two monomers are almost identical with an rmsd between equivalent Cα atoms of 1.04 Å and 0.36 Å for TtTrmI and HsTrmI, respectively. The full tetramer of TtTrmI is generated by proper crystallographic 2-fold symmetry. Although a homo-tetramer of HsTrmI-61 can also be formed using the 2-fold crystallographic symmetry, it is not biologically relevant because HsTrmI, in contrast to bacterial and archeal TrmIs, is a hetero-tetramer. The fact that the asymmetric unit of the HsTrmI-61 crystal consists of the A/D dimer is consistent with the modeling of the full yeast TrmI structure , and strongly suggests that in eukaryotic TrmIs, the A/B and A/C dimers are formed by two different subunits (TrmI-6 and TrmI-61). Therefore, in eukaryotes, the dimeric and tetrameric contacts are formed only between different subunits. The dimers and tetramers of all TrmIs are very similar, and the tetramers of all structures can be superimposed with rmsd of 1.65-3.2 Å (Additional File 1, Table S2A). Therefore, there is no rigid body rearrangement of the monomers between the TrmI proteins, which, in some cases , was shown to be a factor contributing to thermal stability.
Structural comparison of the TrmI monomers shows mobility of the N-terminal domain relative to the C-terminal catalytic domain
The monomer structures of TrmI proteins with known three-dimensional structure are closely similar, with rmsd between 1.34 and 2.70 Å and Q-scores between 0.41 and 0.59 (Additional File 1, Table S2B; Figure 1(D)). One monomer is formed by two domains: a catalytic C-terminal domain that binds the SAM/SAH cofactor with a Rossmann-like fold characteristic of SAM-dependent MTases, and a smaller N-terminal domain with a β-structure. A structure-based multiple sequence alignment and secondary structure assignment for the TrmI monomers are shown in Figure 2. The N-terminal domain (residues 1-67) contains one helix (α1) and six β-strands (βA to βF). The C-terminal domain (residues 68-263) contains seven α-helices and eight β-strands, of which strands β6, βG and βH form an antiparallel β-sheet involved in the tetramer formation. Compared to the other enzymes, HsTrmI-61 has a 10-residue insertion in the turn between αB and β3. The similarity of the structures extends even higher when only the catalytic domains are superposed (Figure 1(D)), revealing a slightly different relative orientation of the N-terminal and catalytic domains in the TrmIs studied. Moreover, comparison of the four monomers in the structure of PaTrmI in the P212121 space group, in which SAH adopts two different conformations , reveals also mobility of the N-terminal domains relative to the tetramer core formed by four catalytic domains. Indeed, the four monomers in the asymmetric unit display a pair-wise rmsd of less than 0.66 Å comparing 253 pairs of Cα atoms, whereas the superposition of the catalytic domains alone gives an rmsd of less than 0.36 Å. The higher B-factors of the N-terminal domain also indicate its mobility relative to the tetramer core (Figure 1 (E)). It is possible that the mobility of the N-terminal domain may be critical to the activity of the enzyme and that a hinged movement may occur upon tRNA binding, as observed for other RNA modifying enzymes . However, although the crystallographic contacts of PaTrmI in the three different space groups are different (Figure 3), the relative orientation of the catalytic and N-terminal domains remains unchanged, which suggests the existence of a preferred conformation of the protein in the absence of tRNA.
Factors responsible for the stability of TrmI proteins under extreme conditions
Structural comparison of homologous enzymes from thermophiles and mesophiles suggests that thermostability originates from several factors . More ion pairs and hydrogen-bonding interactions, reduced exposure of hydrophobic surface, tighter hydrophobic packing of the protein core, reduction in the number and volume of cavities, as well as improved inter-subunit contacts within oligomeric proteins contribute to increasing thermostability [8, 31, 32, 35–39]. These various factors were examined in the case of the TrmI proteins.
Usually, proteins from thermophiles contain more charged and hydrophobic amino acids residues at the expense of polar ones [1, 40]. Additionally, analysis of mesophilic and thermophilic proteins has previously pointed out the tendency towards shorter (even absent) loop regions in thermophilic organisms, which correlates with their compactness [8, 41]. The number of alanine residues and aromatic amino acids is not higher in thermostable TrmIs compared to the less-stable ones (Additional File 1, Table S3). A higher number of prolines increases the backbone rigidity and has been shown to contribute in some cases to protein thermostability . Here, the content of proline residues (between 3.6 and 6.3%; Additional File 1, Table S3) did not reveal outstanding differences between the various TrmI proteins, indicating that reduction of the backbone flexibility is not a factor contributing importantly to the thermostability of TrmI proteins. Noticeably, AaTrmI displays some loop shortenings (Figure 2) and the smallest surface area among the structurally characterized TrmIs (Table 2), two features that could contribute to the thermal stability of AaTrmI.
H-bonds and salt bridges within one TrmI monomer
Increased ion-pairing and hydrogen bonding interactions are factors employed by thermophiles to stabilize their proteins at extreme temperatures. The participation of these interactions in the stability of the monomer was analyzed (Additional File 1, Table S4). The two hyperthermophilic TrmI proteins have the highest number of intra-monomer salt bridges (18 and 20). However, these interactions are not more numerous in the case of the thermophilic TrmI proteins compared to the mesophilic ones. Surprisingly, there are only 6 intra-monomer salt bridges in TtTrmI compared to 11 to 20 in the other TrmI proteins. The number of H-bonds per monomer (203 to 231) is similar in all TrmI proteins.
Although oligomerization has been identified as one of the ways to achieve thermostability of proteins in thermophilic organisms , both mesophilic and thermophilic TrmI proteins are organized as tetramers. This quaternary structure therefore does not result from adaptation to high temperatures but is important for binding the tRNA substrates and for catalytic activity [19, 21–24, 26].
Although the fine interactions between monomers can obviously be modulated by the flexibility of residues located at the structures interfaces, the analysis of the crystallographic coordinates is likely to unveil several features of the quaternary structure characteristic of the thermozymes. To investigate whether TrmI extremozymes are more tightly packed than their mesophilic homologs, the surface areas and the molecular protein volumes of the monomer, A/B dimer and tetramer for each homo-tetrameric protein were calculated (Table 2). All five enzymes have similar surface areas. The monomer protein volume and the number and volume of cavities do not decrease with higher stability of the protein. However, the difference between the volume of the tetramer and the volume of four monomeric units (Δ4 = c-4a, Table 2) is negative for all thermophilic and hyperthermohilic TrmIs, indicating that the protein density increases upon tetramerization. In contrast, this number is positive for the mesophilic MtTrmI protein. Yet, the amount of volume contraction is not directly dependent of the optimal growth temperature of the thermophilic protein. Similarly, the contraction upon dimer formation (Δ2 = b-2a, Table 2) is negative for both thermophilic and hyperthermophilic proteins. This reflects a tight packing of the hyperthermophilic A/B dimers. The surface to volume ratio is another way to measure the compactness (Table 2). Interestingly, this factor decreases as the thermostability of the TrmI protein increases, except for PaTrmI. This might reflect the particularity of this enzyme to possess intermolecular disulfide bridges (see below). Again with the exception of the P. abyssi enzyme, increased buried surface areas within the A/B dimer and within the tetramer (Table 3) correlate with increased thermostability of the TrmI proteins. Indeed, the mesophilic protein has a smaller buried surface area compared to the thermophilic and hyperthermophilic ones. These features related to the oligomerization of the proteins suggested some critical differences at the interfaces of the TrmI monomers and led us to analyze in detail the network of interactions at these interfaces.
Inter-monomer H-bonds, salt bridges and hydrophobic contacts contributing to the TrmI tetramer architecture
The architecture of the TrmI tetramer (Figure 1(B) and 4(C4) and Table 3) shows that the formation of the A/B dimer involves a large buried surface area, which correlates with a high number of residues present at the interface between monomers. The A/C dimer presents a buried surface area that is reduced by a factor around 4 compared to the A/B one and that involves much less residues at the interface. Therefore, TrmI proteins can be described as a dimer of tightly-assembled dimers (A/B and C/D). The A/C dimer, in all available TrmI structures, presents very similar numbers of contacts with about ten hydrogen bonds between the A and C monomers (Table 3). Most residues involved at this interface belong to the C-terminal β-strands (β6, βG and β7, Figures 1(C) and 2). Two charged residues (Glu226 and Arg230, TmTrmI numbering) are involved in two conserved bidentate ionic interactions to form contacts specific of the tetramer at the A/B and C/D dimer interfaces in all TrmIs except PaTrmI (Figures 2 & 4). It was shown that suppressing this conserved ionic interaction by replacing both equivalent interacting residues in the TrmI-6 and TrmI-61 subunits of the S. cerevisiae enzyme by alanine did not prevent formation of the tetramer . These mutations by themselves were not sufficient to destabilize the tetramer because other important interactions remained intact. In PaTrmI, these ionic interactions are replaced essentially by four inter-monomer disulfide bridges (Figure 4(E)). Concerning the A/B interface of TrmIs, the comparison of the number of H-bonds does not indicate a trend that correlates with higher thermostability. Other interactions inside the tight A/B dimer are rather extensive and mainly ionic, particularly for TmTrmI (Figure 4). For the A/B dimer, the number of ionic interactions at the interface between monomers A and B is clearly increased for TrmI proteins from thermophilic organisms (Table 3).
The dimeric (A/B and C/D) and tetrameric (A/D and B/C) interactions also involve, in all TrmIs, van der Waals and hydrophobic interactions (Table 4; Additional File 1, Figure S1B). Although thermophilic TrmIs do not contain more alanine and aromatic residues than TrmIs from mesophiles (Additional File 1, Table S3), a higher number of residues participates in van der Waals interactions. Interestingly, PaTrmI exhibits unusually low hydrophobic P v values  for both the dimeric and tetrameric interface, which indicates specific hydrophobic spots. In particular, Phe225 makes hydrophobic contacts with Leu223 and Val242. This interaction substitutes, together with the inter-monomer disulfide bridges (see below), to the conserved ionic salt bridges involved in tetramer stabilization in all other TrmI proteins. Indeed, Phe225 occupies the position equivalent to Arg230 that conservatively establishes a bidentate ionic interaction with Glu226 (Figure 2 and Additional File 1, Figure S1B). AaTrmI also exhibits a low hydrophobic P-value for the A/B interface. Therefore, increased hydrophobic interactions at the dimeric interface in the hyperthermophilic TrmIs could account for the fact that the number of ionic interactions is not increased compared to the mesophilic and thermophilic proteins.
In summary, whereas thermophilic TrmIs use a higher number of ionic interactions to stabilize the A/B interface, hyperthermophilic TrmIs display increased hydrophobic interactions. This is in agreement with other studies that conclude that ionic interactions stabilizing crucial areas of structure, together with increased hydrophobic packing, are the most common means for stabilizing proteins at high temperatures, particularly oligomeric proteins. For example, comparison of tetrameric malate dehydrogenases from thermophilic and mesophilic bacteria indicated that higher thermostability comes first from the presence of polar residues that form additional hydrogen bonds within each subunit and then with the use of charged residues to form additional ionic interactions along the dimer-dimer interface, as well as additional aromatic contacts at the monomer-monomer interface in each dimer . Moreover, comparative structural analysis of various citrate synthases also showed that higher growth temperatures correlate with reinforced electrostatic interactions in the subunit interface, as well as a reduced exposure of hydrophobic surface . Interestingly, TmTrmI, which has an optimum growth temperature of 80°C (the limit temperature to distinguish a thermophilic and a hyperthermophilic organism), has the highest number both of salt bridges and van der Waals contacts at the A/B dimer interface (Table 3). Therefore, TmTrmI displays the highest buried surface areas for the A/B and A/C dimers and seems to employ both strategies used by thermophilic and hyperthermophilic TrmI proteins to achieve thermostability.
Archaeal PaTrmI displays very different tetrameric contacts compared to the bacterial enzymes: Intersubunit disulfide bridges stabilize the tetramer
In addition to enhanced hydrophobic interactions at the interfaces, the archaeal PaTrmI further increases its thermostability through the use of intersubunit disulfide bridges [21, 27]. In PaTrmI, the subunits are more tightly bound than in TrmIs from thermophilic bacteria, as shown by the value of 41 kcal/mole for the free energy difference between the dissociated and associated states (Table 3), despite the fact that the buried surface areas of the dimers and tetramer are less extensive than anticipated for a hyperthermophilic organism. This increased stability of the PaTrmI tetramer compared to that of the other TrmI proteins results from the presence of four intermolecular disulfide bonds between Cys196 and Cys233 from different subunits (Figure 4E). Disulfide bonds are extremely rare in intracellular proteins from mesophilic organisms, due to the reductive nature of the cytoplasm . In contrast, their presence in several intracellular thermophilic proteins has been shown to increase the stability of the proteins from these organisms at extreme temperatures [46–49]. The presence of inter-subunit disulfide bonds in PaTrmI is consistent with the presence, in this organism, of a specific disulfide oxidoreductase protein, which is usually involved in the formation of intramolecular disulfide bonds within intracellular proteins from thermophilic organisms . To determine whether the inter-subunit disulfide bridges are important for the stability and function of PaTrmI, the single and double mutant proteins, in which Cys196 or/and Cys233 were replaced by serine, were produced and purified . Whereas both single mutants migrated as a mixture of monomers and dimers on SDS-PAGE under non-reducing conditions, the double mutant migrated as a monomer. Gel filtration chromatography indicated that the single mutants formed high molecular weight aggregates and that the double mutant behaved predominantly as a dimer. Differential scanning calorimetry experiments indicated that the melting temperature of the double mutant is lowered by 16.5°C compared to that of the wild-type enzyme . Finally, the double mutant was completely inactivated after preincubation at 85°C for 30 min. Altogether, these experiments indicated that the intersubunit disulfide bridges are essential for the thermostability of the tetramer of PaTrmI.
In the present study, we aimed at performing a detailed structural analysis to investigate the structural mechanisms underlying stability in TrmIs from organisms spanning a large variety of optimal growth conditions. Our analysis of the different TrmI monomers, in terms of amino-acid composition, three-dimensional structure, hydrogen-bonding and ionic interactions, did not uncover clear hallmarks to explain the stability of the extremozymes. On the contrary, we identified structural differences between TrmIs from mesophiles, moderate or extreme thermophiles, in the compactness of their dimeric and tetrameric units and in the nature of the interactions between their monomers. Thermophilic TrmIs display tight packing at these interfaces, resulting in a slight increase of compactness upon multimerization. To investigate further this feature, we analyzed the contacts between monomers. First, the number of ionic interactions between monomers increases in the thermophilic TrmIs and seems to be one of the main factors providing thermostability. Secondly, the two hyperthermophilic TrmI proteins display dimeric interfaces with increased hydrophobic interactions. In addition, PaTrmI from P. abyssi, which grows not only under extreme conditions of temperature but also under high pressure, possesses inter-subunit disulfide bridges that were shown to be essential for its thermostability [21, 27]. Therefore, our analysis revealed that different molecular strategies have emerged to ensure strong interactions at the interfaces between monomers in order to preserve the tetrameric architecture of TrmI under extreme life conditions. The key challenge for TrmI extremozymes is thus to preserve the tetrameric architecture crucial for their catalytic activity.
Multiple sequence alignment
The multiple structure-based sequence alignment was done with SSM (Secondary-structure Matching, http://www.ebi.ac.uk/msd-srv/ssm/)  and visualized with the program JOY (http://tardis.nibio.go.jp/cgi-bin/joy/joy.cgi) . SSM was also used to determine the root mean square deviations between the superposed structures.
Volume and surface calculations
The program VOIDOO was used to calculate molecular protein volumes and cavities . The molecular volumes of the proteins per se were calculated using a grid spacing of 1 Å and a 0 Å radius probe and the cavity volumes with a 1.4 Å radius probe. The SAM/SAH cofactors and water molecules were omitted from the calculations. Accessible surface areas were calculated using the program ASA (P. Alzari, personal communication).
The salt bridges and H-bonds within one monomer (less than 3.5 Å) were analyzed with HBOND (http://cib.cf.ocha.ac.jp/bitool/HBOND/). The H-bonds, ionic interactions and van der Waals contacts between monomers were analyzed by examining the structures graphically. The interface areas and stabilities of the tetramers were calculated with the program PISA, omitting the ligands (http://www.ebi.ac.uk/msd-srv/prot_int/pistart.html) . Our analysis was done using the PDB coordinates. However, several side chain atoms are not observed in the electron density and are therefore missing in some PDB files. Those missing residues could influence the contraction upon dimerization and tetramerization if they were located at the interface between the different subunits. This is not the case except for one side chain (Leu228 in T. maritima 1O54). All other missing side chains belong to Lys, Arg, Glu and Gln residues at the surface of the protein, pointing towards the solvent.
The abbreviations used are: MTase: methyltransferase; rmsd: root mean square deviation; SAM: S-adenosyl-L-methionine; SAH: S-adenosyl-L-homocysteine; PaTrmI: Pyroccocus abyssi tRNA m1A58 methyltransferase; TtTrmI: Thermus thermophilus tRNA m1A58 methyltransferase; MtTrmI: Mycobacterium tuberculosis tRNA m1A58 methyltransferase; AaTrmI: Aquifex aeolicus tRNA m1A58 methyltransferase; TmTrmI: Thermotoga maritima tRNA m1A58 methyltransferase; HsTrmI-61: Trm61 subunit of Homo sapiens tRNA m1A58 methyltransferase.
Taylor TJ, Vaisman II: Discrimination of thermophilic and mesophilic proteins. BMC Struct Biol 2010, 10(Suppl 1):S5. 10.1186/1472-6807-10-S1-S5
Vieille C, Burdette DS, Zeikus JG: Thermozymes. Biotechnol Annu Rev 1996, 2: 1–83.
Farias ST, Bonato MC: Preferred amino acids and thermostability. Genet Mol Res 2003, 2(4):383–393.
Cambillau C, Claverie JM: Structural and genomic correlates of hyperthermostability. J Biol Chem 2000, 275(42):32383–32386.
Yennamalli RM, Rader AJ, Wolt JD, Sen TZ: Thermostability in endoglucanases is fold-specific. BMC Struct Biol 2011, 11: 10. 10.1186/1472-6807-11-10
Bogin O, Peretz M, Hacham Y, Korkhin Y, Frolow F, Kalb AJ, Burstein Y: Enhanced thermal stability of Clostridium beijerinckii alcohol dehydrogenase after strategic substitution of amino acid residues with prolines from the homologous thermophilic Thermoanaerobacter brockii alcohol dehydrogenase. Protein Sci 1998, 7(5):1156–1163. 10.1002/pro.5560070509
Opperman DJ, Sewell BT, Litthauer D, Isupov MN, Littlechild JA, van Heerden E: Crystal structure of a thermostable old yellow enzyme from Thermus scotoductus SA-01 . Biochem Biophys Res Commun 2010, 393(3):426–431. 10.1016/j.bbrc.2010.02.011
Thompson MJ, Eisenberg D: Transproteomic evidence of a loop-deletion mechanism for enhancing protein thermostability. J Mol Biol 1999, 290(2):595–604. 10.1006/jmbi.1999.2889
Kumar S, Nussinov R: How do thermophilic proteins deal with heat? Cell Mol Life Sci 2001, 58(9):1216–1233. 10.1007/PL00000935
Chakravarty S, Varadarajan R: Elucidation of determinants of protein stability through genome sequence analysis. FEBS Lett 2000, 470(1):65–69. 10.1016/S0014-5793(00)01267-9
Petsko GA: Structural basis of thermostability in hyperthermophilic proteins, or "there's more than one way to skin a cat". Methods Enzymol 2001, 334: 469–478.
Matsui I, Harata K: Implication for buried polar contacts and ion pairs in hyperthermostable enzymes. FEBS J 2007, 274(16):4012–4022. 10.1111/j.1742-4658.2007.05956.x
Razvi A, Scholtz JM: Lessons in stability from thermophilic proteins. Protein Sci 2006, 15(7):1569–1578. 10.1110/ps.062130306
Sterpone F, Melchionna S: Thermophilic proteins: insight and perspective from in silico experiments. Chem Soc Rev 2011.
Grosjean H: DNA and RNA Modification Enzymes: Structure, Mechanism, Function and Evolution. Austin, Texas, USA: Landes Biosciences; 2009.
Motorin Y, Grosjean H: Chemical structures and classification of post-transcriptionally modified nucleosides in RNA. In Modification and editing of RNA. Edited by: Grosjean HaBR. Washington DC: ASM Press; 1998.
Björk GR: tRNA: Structure Biosynthesis and function. In Am Soc Microbiol. Washington D.C.: Söll, D. & RajBhandary, U. L; 1995.
Anderson J, Phan L, Cuesta R, Carlson BA, Pak M, Asano K, Bjork GR, Tamame M, Hinnebusch AG: The essential Gcd10p-Gcd14p nuclear complex is required for 1-methyladenosine modification and maturation of initiator methionyl-tRNA. Genes Dev 1998, 12(23):3650–3662. 10.1101/gad.12.23.3650
Droogmans L, Roovers M, Bujnicki JM, Tricot C, Hartsch T, Stalon V, Grosjean H: Cloning and characterization of tRNA (m1A58) methyltransferase (TrmI) from Thermus thermophilus HB27, a protein required for cell growth at extreme temperatures. Nucleic Acids Res 2003, 31(8):2148–2156. 10.1093/nar/gkg314
Schubert HL, Blumenthal RM, Cheng X: Many paths to methyltransfer: a chronicle of convergence. Trends Biochem Sci 2003, 28(6):329–335. 10.1016/S0968-0004(03)00090-2
Roovers M, Wouters J, Bujnicki JM, Tricot C, Stalon V, Grosjean H, Droogmans L: A primordial RNA modification enzyme: the case of tRNA (m1A) methyltransferase. Nucleic Acids Res 2004, 32(2):465–476. 10.1093/nar/gkh191
Varshney U, Ramesh V, Madabushi A, Gaur R, Subramanya HS, RajBhandary UL: Mycobacterium tuberculosis Rv2118c codes for a single-component homotetrameric m1A58 tRNA methyltransferase. Nucleic Acids Res 2004, 32(3):1018–1027. 10.1093/nar/gkh207
Ozanick S, Krecic A, Andersland J, Anderson JT: The bipartite structure of the tRNA m1A58 methyltransferase from S. cerevisiae is conserved in humans. RNA 2005, 11(8):1281–1290. 10.1261/rna.5040605
Ozanick SG, Bujnicki JM, Sem DS, Anderson JT: Conserved amino acids in each subunit of the heteroligomeric tRNA m1A58 MTase from Saccharomyces cerevisiae contribute to tRNA binding. Nucleic Acids Res 2007, 35(20):6808–6819. 10.1093/nar/gkm574
Gupta A, Kumar PH, Dineshkumar TK, Varshney U, Subramanya HS: Crystal structure of Rv2118c: an AdoMet-dependent methyltransferase from Mycobacterium tuberculosis H37Rv. J Mol Biol 2001, 312(2):381–391. 10.1006/jmbi.2001.4935
Barraud P, Golinelli-Pimpaneau B, Atmanème C, Sanglier S, van Dorsselaer A, Droogmans L, Dardel F, Tisné C: Crystal structure of Thermus thermophilus tRNA m1A58 methyltransferase and biophysical characterization of its interaction with tRNA. J Mol Biol 2008, 377: 535–550. 10.1016/j.jmb.2008.01.041
Guelorget A, Roovers M, Guérineau V, Barbey C, Li X, Golinelli-Pimpaneau B: Insights into the hyperthermostability and unusual region-specificity of archaeal Pyrococcus abyssi tRNA m1A57/58 methyltransferase. Nucleic Acids Res 2010, 38(18):6206–6218. 10.1093/nar/gkq381
Bujnicki JM: In silico analysis of the tRNA:m1A58 methyltransferase family: homology-based fold prediction and identification of new members from Eubacteria and Archaea. FEBS Lett 2001, 507(2):123–127. 10.1016/S0014-5793(01)02962-3
Li H, Trotta CR, Abelson J: Crystal structure and evolution of a transfer RNA splicing enzyme. Science 1998, 280(5361):279–284. 10.1126/science.280.5361.279
Palioura S, Sherrer RL, Steitz TA, Soll D, Simonovic M: The human SepSecS-tRNASec complex reveals the mechanism of selenocysteine formation. Science 2009, 325(5938):321–325. 10.1126/science.1173755
Korkhin Y, Kalb AJ, Peretz M, Bogin O, Burstein Y, Frolow F: Oligomeric integrity--the structural key to thermal stability in bacterial alcohol dehydrogenases. Protein Sci 1999, 8(6):1241–1249. 10.1110/ps.8.6.1241
Vieille C, Zeikus GJ: Hyperthermophilic enzymes: sources, uses, and molecular mechanisms for thermostability. Microbiol Mol Biol Rev 2001, 65(1):1–43. 10.1128/MMBR.65.1.1-43.2001
Salminen T, Teplyakov A, Kankare J, Cooperman BS, Lahti R, Goldman A: An unusual route to thermostability disclosed by the comparison of Thermus thermophilus and Escherichia coli inorganic pyrophosphatases. Protein Sci 1996, 5(6):1014–1025.
Guelorget A, Golinelli-Pimpaneau B: Mechanism-based strategies for trapping and crystallizing complexes of RNA-modifying enzymes. Structure 2011, 19(3):282–291. 10.1016/j.str.2011.01.005
Yip KS, Stillman TJ, Britton KL, Artymiuk PJ, Baker PJ, Sedelnikova SE, Engel PC, Pasquo A, Chiaraluce R, Consalvi V: The structure of Pyrococcus furiosus glutamate dehydrogenase reveals a key role for ion-pair networks in maintaining enzyme stability at extreme temperatures. Structure 1995, 3(11):1147–1158. 10.1016/S0969-2126(01)00251-9
Elcock AH: The stability of salt bridges at high temperatures: implications for hyperthermophilic proteins. J Mol Biol 1998, 284(2):489–502. 10.1006/jmbi.1998.2159
Merz A, Knochel T, Jansonius JN, Kirschner K: The hyperthermostable indoleglycerol phosphate synthase from Thermotoga maritima is destabilized by mutational disruption of two solvent-exposed salt bridges. J Mol Biol 1999, 288(4):753–763. 10.1006/jmbi.1999.2709
Dalhus B, Saarinen M, Sauer UH, Eklund P, Johansson K, Karlsson A, Ramaswamy S, Bjork A, Synstad B, Naterstad K, et al.: Structural basis for thermophilic protein stability: structures of thermophilic and mesophilic malate dehydrogenases. J Mol Biol 2002, 318(3):707–721. 10.1016/S0022-2836(02)00050-5
Bell GS, Russell RJ, Connaris H, Hough DW, Danson MJ, Taylor GL: Stepwise adaptations of citrate synthase to survival at life's extremes. From psychrophile to hyperthermophile. Eur J Biochem 2002, 269(24):6250–6260. 10.1046/j.1432-1033.2002.03344.x
Haney PJ, Badger JH, Buldak GL, Reich CI, Woese CR, Olsen GJ: Thermal adaptation analyzed by comparison of protein sequences from mesophilic and extremely thermophilic Methanococcus species. Proc Natl Acad Sci USA 1999, 96(7):3578–3583. 10.1073/pnas.96.7.3578
Russell RJ, Hough DW, Danson MJ, Taylor GL: The crystal structure of citrate synthase from the thermophilic archaeon, Thermoplasma acidophilum . Structure 1994, 2(12):1157–1167. 10.1016/S0969-2126(94)00118-9
Watanabe K, Hata Y, Kizaki H, Katsube Y, Suzuki Y: The refined crystal structure of Bacillus cereus oligo-1,6-glucosidase at 2.0 A resolution: structural characterization of proline-substitution sites for protein thermostabilization. J Mol Biol 1997, 269(1):142–153. 10.1006/jmbi.1997.1018
Walden H, Bell GS, Russell RJ, Siebers B, Hensel R, Taylor GL: Tiny TIM: a small, tetrameric, hyperthermostable triosephosphate isomerase. J Mol Biol 2001, 306(4):745–757. 10.1006/jmbi.2000.4433
Krissinel E, Henrick K: Inference of macromolecular assemblies from crystalline state. J Mol Biol 2007, 372(3):774–797. 10.1016/j.jmb.2007.05.022
Gilbert HF: Molecular and cellular aspects of thiol-disulfide exchange. Adv Enzymol Relat Areas Mol Biol 1990, 63: 69–172.
Toth EA, Worby C, Dixon JE, Goedken ER, Marqusee S, Yeates TO: The crystal structure of adenylosuccinate lyase from Pyrobaculum aerophilum reveals an intracellular protein with three disulfide bonds. J Mol Biol 2000, 301(2):433–450. 10.1006/jmbi.2000.3970
Ogasahara K, Khechinashvili NN, Nakamura M, Yoshimoto T, Yutani K: Thermal stability of pyrrolidone carboxyl peptidases from the hyperthermophilic Archaeon, Pyrococcus furiosus . Eur J Biochem 2001, 268(11):3233–3242. 10.1046/j.1432-1327.2001.02220.x
Meyer J, Clay MD, Johnson MK, Stubna A, Munck E, Higgins C, Wittung-Stafshede P: A hyperthermophilic plant-type [2Fe-2S] ferredoxin from Aquifex aeolicus is stabilized by a disulfide bond. Biochemistry 2002, 41(9):3096–3108. 10.1021/bi015981m
Karlström M, Stokke R, Steen IH, Birkeland NK, Ladenstein R: Isocitrate dehydrogenase from the hyperthermophile Aeropyrum pernix : X-ray structure analysis of a ternary enzyme-substrate complex and thermal stability. J Mol Biol 2005, 345(3):559–577. 10.1016/j.jmb.2004.10.025
Beeby M, O'Connor BD, Ryttersgaard C, Boutz DR, Perry LJ, Yeates TO: The genomics of disulfide bonding and protein stabilization in thermophiles. PLoS Biol 2005, 3(9):e309. 10.1371/journal.pbio.0030309
Krissinel E, Henrick K: Secondary-structure matching (SSM), a new tool for fast protein structure alignment in three dimensions. Acta Crystallogr D Biol Crystallogr 2004, 60(Pt 12 Pt 1):2256–2268.
Mizuguchi K, Deane CM, Blundell TL, Johnson MS, Overington JP: JOY: protein sequence-structure representation and analysis. Bioinformatics 1998, 14(7):617–623. 10.1093/bioinformatics/14.7.617
Kleywegt GJ, Jones TA: Detection, delineation, measurement and display of cavities in macromolecular structures. Acta Crystallogr D Biol Crystallogr 1994, 50(Pt 2):178–185.
Schluckebier G, O'Gara M, Saenger W, Cheng X: Universal catalytic domain structure of AdoMet-dependent methyltransferases. J Mol Biol 1995, 247(1):16–20. 10.1006/jmbi.1994.0117
Acknowledgements and funding
This work was supported by the Association pour la Recherche sur le Cancer (to B.G.P) and by the CNRS.
BGP coordinated the project. AG and PB analyzed the structures. AG drew the figures. All authors analyzed and interpreted the data. All authors wrote the manuscript. All authors discussed the results and approved the final manuscript.
Electronic supplementary material
About this article
Cite this article
Guelorget, A., Barraud, P., Tisné, C. et al. Structural comparison of tRNA m1A58 methyltransferases revealed different molecular strategies to maintain their oligomeric architecture under extreme conditions. BMC Struct Biol 11, 48 (2011) doi:10.1186/1472-6807-11-48
- Thermophilic Protein
- Thermophilic Organism
- Bury Surface Area
- Comparative Structural Analysis
- Hyperthermophilic Protein